kerfmaster -- front_wall + 9 more, part-list delivery v1 (O33485)

Mild Steel,0.125 on GX 10K · 10 parts (10 distinct) on 1 sheet, one program per sheet, part-by-part by construction · usage 22.0% · delivered 2026-10-08 14:34:45 · app job front-wall-9-more-1790885186

⬇ 33485.nc ⬇ front_wall_9_more_sheet_shop.dxf ⬇ front_wall_9_more_tooling.json ⬇ front_wall_9_more_slugs.csv ⬇ front_wall_9_more_operator.pdf ⬇ front_wall_9_more_partmap.csv ⬇ customer.html ⬇ packet.html ⬇ packet.json ⬇ front_wall_9_more_partlist_delivery_v1.zip

2 RED / 13 YELLOW warnings -- called out in the program text. Read them before running.

RED -- comp on the WRONG SIDE (offset into the part) on feature [25, 26, 27] -- cuts undersize, do not run

YELLOW -- tab on an interior above the slug-tab large limit (too big to tip, no tab needed) on feature [25]

RED -- cut AFTER the severed outer that contains it (feature, outer): [(25, 24)] -- outer profile must finish last (re-sequence hazard, Jordan 2026-08-28)

YELLOW -- pierce feature 1 of sub O75559 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 2 of sub O75559 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 3 of sub O75559 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 1 of sub O75560 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 2 of sub O75560 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 3 of sub O75560 clear air 0.0165 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 1 of sub O75561 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 2 of sub O75561 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 3 of sub O75561 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 5 of sub O75561 clear air 0.0165 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 1 of sub O75563 clear air 0.0817 < 0.15 standoff -- all 1 copies

YELLOW -- pierce feature 2 of sub O75563 clear air 0.0817 < 0.15 standoff -- all 1 copies

comp on the WRONG SIDE (offset into the part) on feature [25, 26, 27] -- cuts undersize, do not run

feature 19 is PROFILE but posts #501=#107/D1 -- table says #108/D3

feature 20 is PROFILE but posts #501=#107/D1 -- table says #108/D3

feature 24 is PROFILE but posts #501=#107/D1 -- table says #108/D3

feature 26 is PROFILE but posts #501=#107/D1 -- table says #108/D3

feature 27 is PROFILE but posts #501=#107/D1 -- table says #108/D3

tab on an interior above the slug-tab large limit (too big to tip, no tab needed) on feature [25]

cut AFTER the severed outer that contains it (feature, outer): [(25, 24)] -- outer profile must finish last (re-sequence hazard, Jordan 2026-08-28)

pierce feature 1 of sub O75559 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 2 of sub O75559 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 3 of sub O75559 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 1 of sub O75560 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 2 of sub O75560 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 3 of sub O75560 clear air 0.0165 < 0.15 standoff -- all 1 copies

pierce feature 1 of sub O75561 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 2 of sub O75561 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 3 of sub O75561 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 5 of sub O75561 clear air 0.0165 < 0.15 standoff -- all 1 copies

pierce feature 1 of sub O75563 clear air 0.0817 < 0.15 standoff -- all 1 copies

pierce feature 2 of sub O75563 clear air 0.0817 < 0.15 standoff -- all 1 copies

MetaCam-safety census on every delivered sheet DXF (a FAIL refuses the delivery); sheet 1: PASS -- CIRCLE x10, POLYLINE x24, SEQEND x24, VERTEX x308 (only POLYLINE/VERTEX/SEQEND/CIRCLE may appear).

Sheet 1 of 1 -- O33485, 10 parts

The customer sheet reads, verbatim (customer.html in this delivery set):

“10 pieces across 10 different parts, arranged together on 1 sheet of Mild Steel, 0.125" thick (120" x 60" each).”
“front_wall.dxf: 1, exactly as asked.”
“mid_plate_1.dxf: 1, exactly as asked.”
“mid_plate_2.dxf: 1, exactly as asked.”
“rear_wall.dxf: 1, exactly as asked.”
“rib-9397.dxf: 1, exactly as asked.”
“rib-11708.dxf: 1, exactly as asked.”
“rib-12129.dxf: 1, exactly as asked.”
“shield_1.dxf: 1, exactly as asked.”
“shield_2_-_unfolded.dxf: 1, exactly as asked.”
“shield_3.dxf: 1, exactly as asked.”
“2 points on this job need a decision before we cut -- we will review them with you first.”
“Prepared 2026-10-08 14:34:45 -- revision 1.”

Delivery set of the packed part list -- shop set plus the customer sheet (customer/shop split, one dataset two renderers). Versions are immutable: a re-delivery supersedes this build in the app's version list, this page stands.